• head_banner_01

Aluminum template fastener

Short Description:


Product Detail

Product Tags

Product Description

>>>

Astener generally refers to the intermediate connecting part connecting two components, which is mostly used for external diameter in construction engineering Φ For the fixation of 48mm steel pipe scaffold, the fasteners are divided into right angle fasteners (cross fasteners and directional fasteners), rotary fasteners (movable fasteners and universal fasteners), butt fasteners (straight line fasteners and direct fasteners), etc

Advantage: Time-saving: Take a 30-square-meter mold assembly structure as an example, the on-site operation can be completed in 3-5 minutes.

Labor saving: Improve construction efficiency and shorten construction period. The traditional structure requires labor cost about 15 yuan per square meter, while the digital rigid support can be completed with only 2 yuan labor cost.

Material saving: the cost of materials is reduced, and there is no need for wood, the purchase of wood and steel pipes, lead screws, iron wires, and nails.

High reusable rate: it can be reused 300 times, while traditional wood can only be reused 5 to 6 times.

High degree of safety: This product is completely steel structure, standard parts are fastened, the structure is tight, the connection is compact, and it is safer and more reliable.

Enhance corporate image: beautiful and tidy, tidy and generous, the construction site is tidy and orderly, easier to manage, and can greatly enhance the overall image of the project.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Building support, steel support

      Building support, steel support

      Product Description >>> 1. Introduction to adjustable steel support: The adjustable steel support (steel pillar) is composed of lower casing, upper intubation and adjustable device. The upper intubation is drilled with equally spaced bolt holes, The upper part of the casing is provided with an adjustable wire sleeve, which can flexibly adjust various heights of the column, and the installation is conveni...

    • Pull piece stereo

      Pull piece stereo

      Product Description >>> The split piece is generally used as a formwork support auxiliary tool for vertical components such as wall columns supported by small steel formwork Generally, the style of pull tab is a section of 10-12 reinforcement in the middle. One or both ends are welded with small steel sheets with holes, which are clamped in the joint between two steel molds. The holes of the steel sheets...

    • screw

      screw

      Product Description >>> The split screw is used for the tie between the inner and outer formwork of the wall to bear the lateral pressure and other loads of the concrete, so as to ensure that the spacing between the inner and outer formwork can meet the design requirements, and it is also the fulcrum of the formwork and its supporting structure. Therefore, the arrangement of split bolts has a great impac...

    • Steel support

      Steel support

      Product Description >>> 1. Introduction to adjustable steel support: The adjustable steel support (steel pillar) is composed of lower casing, upper intubation and adjustable device. The upper intubation is drilled with equally spaced bolt holes, The upper part of the casing is provided with an adjustable wire sleeve, which can flexibly adjust various heights of the column, and the installation is conveni...

    • Top support and bottom support

      Top support and bottom support

      Product Description >>> The scaffold specification stipulates that the extension length of the adjustable base and adjustable support screw of the full support frame shall not exceed (300) mm, and the length inserted into the vertical rod shall not be less than (150) mm. Jacking, an indispensable and important building tool in the process of scaffold erection and use, plays an important role. It plays th...

    • Aluminum die pin piece spot aluminum die pin piece

      Aluminum die pin piece spot aluminum die pin piece

      Product Description >>> Product nickname: aluminum template pin, aluminum template pin, aluminum template pin Pin material: Q235 Pin material: Q235, 45# steel Pin specifications: 16 * 52, 16 * 54, 15 * 125, 16 * 140 (solid pin, imitation solid pin) Pin specification: 3 * 70 ribbed, 3.5 * 70 bent pin Surface treatment: natural color, galvanized, color plated Function of pin: it is used for assembly and co...